Volkswagen Key Programming TipsVolkswagen offers a simple method to replace a key that has stopped functioning or add an additional. With a few simple steps the procedure can be inexpensive and simple.
The first step is to find the right key fob. It must have a key blade that flips out or be internally fixed in the key fob. Next, gather all the necessary documents to verify ownership. Then, visit the dealership or a third-party locksmith.
Immobilizer
The immobilizer is a device that prevents keys that are damaged or unauthorized from beginning the car. The system detects a particular chip on each key. A VW dealer or locksmith for automobiles can program additional keys, however the process requires specialized software and tools. The right tools are necessary to have a smooth experience. Technicians should try to reproduce the issue prior to starting the key programming. They should also search for fault codes on the vehicle, check for technical bulletins (TSBs) and test the battery inside the key fob.
Volkswagen keys that are not programmed with immobilizer chips will shut down the engine after a couple of minutes of cranking. The immobilizer chip doesn't prevent the alarm from turning on or allowing doors to be opened. The immobilizer on the key fob is an additional piece that is attached to the metal flip side of the car keys. It must be programmed to the car's computer in order to function.
It's more expensive add an additional VW key than to make a duplicate when all of the original keys were lost. The key must be purchased from the manufacturer and [Redirect Only] undergo a special programming process to be synchronized with the car's computer. This can be accomplished by a professional using software like VagTacho and VCDS. This procedure is recommended for cars with the older Immobilizer 2, and older.
Electronic Ignition
The electronic ignition feature of a key is an essential component of a car's anti-theft feature. It's activated every time the key fob is placed in the ignition. It's not a 100% secure system, however. It is susceptible to failure, which can cause the engine of your VW not starting. This can result from a variety of causes like malfunctioning key programming or a poorly maintained car battery.
You can avoid this problem when you have your Volkswagen car key fobs programmed professionally. This can be accomplished by a dealer or locksmith. The costs for this service are different, but are usually between $90 and $150. Prices also vary depending on the model of your car and year.
You'll need your main key to program the new VW key fob. The new key needs to be able start the vehicle. This will allow onboard diagnostics to recognize the key as an authorized one. Then, the immobilizer alert light will go off.
Certain models require a 3four-digit PIN in order to enable key programming onboard. Certain models might require a scanner tool. Locksmiths or dealers can utilize a scanner to program keys onboard. These tools aren't in the general auto accessory stores, so you'll have to purchase one or borrow it from an auto dealer.
Keyless Entry
If your Volkswagen key fob is having battery issues, or lost it altogether it's possible that the car will start, but it won't unlock. This issue is simple to solve. First, make sure that the key fob is visible to the vehicle. If it is, hold the lock button for six seconds until lights flash on the key.
This will reset the key fob's proximity to your VW. After doing this you can attempt to unlock the car by pressing the unlock button on the fob's key again. If the vehicle doesn't unlock, you'll have to make contact with a dealer in order to have the key programmed.
The process of getting a new Volkswagen key programmed could be costly. It is important to get quotes from multiple dealers before making a decision on the best option for you. Also, be sure to check if the dealer charges for key programming and for the new key itself.
A second volkswagen keys replacement key is a great idea for a variety of reasons. It is possible to require a backup key in case your primary key gets lost or stolen. If you have a spare key and want to program it to ensure it will work with your Volkswagen here are some easy steps to follow.
Remote Start
In contrast to previous generations of key fobs, which communicated with your vehicle using radio waves, Volkswagen's remote start systems connect to your car via secure wireless connections over the cellular technology. VW Atlas, Jetta or Passat can detect that you are within range to trigger features like push-button entry or keyless start. The process is as easy as opening the app on your smartphone connecting it to your vehicle, and then pressing the button.
Be certain that your Volkswagen is parked, and the driver's side door is closed. This will ensure that only the correct key is used in order to access the features of your car. The dashboard will display an error if the key is not recognized. In addition, this method can only be used on newer VW models that utilize an RFID sensor ring on the steering column. These models require the secret pin be programmed.
Close the door on the driver's side and remove the key that is used to create the new keyfob. Next you need to press the lock button on the new key fob. This will alert the vehicle that it's a functioning key. The key will then begin sending signals to enable you to open the driver's side door and also start your car remotely. Some users report that this works only if there is a clear line of sight to the car, but others have succeeded even in congested parking lots.