The Ghost 2 Immobiliser
The Ghost 2 immobiliser is the world's first aftermarket CAN bus immobiliser and it shields your vehicle from key-cloninghacking and even key theft. The only way a thief could steal your car is by physically towing it away and then they'd have to enter the correct PIN code before they'd be able to begin the car!
Keys and LEDs are not illuminated or have no Key Fobs
Like other immobilisers, Ghost 2 doesn't use key fobs or LED indicators to notify the user of their PIN code , or when the system is shut down. This feature is hidden to prevent thieves from spotting the device.
A PIN number is sent via the switch in your car to the Ghost immobiliser. This will stop your vehicle from getting started. It is easy to install and the user can change their password at any time.
The Autowatch Ghost does not require additional batteries or radio frequencies. This makes it possible to be installed in a wide variety of vehicles.
It stops your vehicle from starting if you use the wrong key. It also shuts down parts such as the starter motor and fuel system, making your vehicle immobilised.
This is a huge advantage because it means you don't be worried about your vehicle being stolen. It's also safer to drive, as criminals won't be able to start your car again after it's been disabled.
The Ghost system uses the CAN bus to communicate with the ECU of your vehicle. It will only let your car to start when you have entered a certain sequence of key presses into your vehicle's factory buttons. This sequence of key presses can be as long as 20 and is a unique PIN number that you only know.
Your engineer will explain the procedure for inserting the disarm sequence into your vehicle's buttons, like the steering wheel button, door-panel buttons, or centre console buttons. Once the pin code is entered into your vehicle it will be impossible for any other person to start your car.
A TASSA-approved security device for vehicles, the Ghost 2 is an ideal solution to safeguard your vehicle from hacking, theft and key-cloning. The absence of LED indicators and key-fobs makes it difficult to be found by thieves.
It's compatible with a variety of vehicles and can be installed by an approved garage without causing any damage or altering components of your vehicle. It won't void your warranty, and it can't be detected using professional diagnostic tools. This makes it safe to drive.
No Circuit Cuts
The Ghost 2 immobiliser works using buttons on your vehicle to create a personalised PIN Code sequence. This must be entered before the engine can begin. The sequence of presses could be as long as 20 digits and is able to be altered at any time , without replacing the wiring. It is impossible for thieves to find the code before trying to gain entry.
It also has a Service/Valet mode which allows your vehicle to be driven and started without the the PIN Code. This feature is designed to help you deactivate the Ghost if your car will be used as a valet parking vehicle or as services.
During installation your car will be tested thoroughly to make sure that the Ghost is working as it should. This is an essential aspect of the process and we will run through everything with you to ensure that you are satisfied with the installation before you leave.
We will then create your personal PIN Code in the Ghost to ensure that it's safe, giving you peace of mind that it isn't broken into. This is a great method for you to avoid additional security systems like remote keys and key fobs that are susceptible to theft and hacking particularly in light of the fact that theft via contactless how much is a ghost immobiliser growing in Europe.
The CAN bus data network that ghost immobiliser and tracker uses is invisible to thieves, which prevents them from using radio frequency or code-grabbing technology to detect the security system installed in your car. This is a crucial factor when it comes to the security of your vehicle. It gives you a greater level of security than other immobilisers on the market.
The Ghost has no circuit cuts that means it cannot be manipulated by professional crooks who employ tools for diagnosing and remove alarms or immobilisers on modern vehicles. This is crucial as many of the cheapest and effective ways to break into a car is by cutting wires, or altering the relays in a traditional immobiliser.
No scans using RF
Ghost 2 is the most modern generation of security for your car. It completely protects your vehicle from key cloning and hacking as well as theft. It makes use of your vehicle's existing buttons to enter an exclusive and flexible PIN code sequence. This is similar to a credit card.
The Ghost 2 is not like traditional car security devices. It doesn't include any key fobs, circuit cuts or LED indicators that could be used to track location information. The device communicates with the ECU via CAN bus and will only start your car once it has entered the correct pin sequence.
This makes it difficult for a thief to bypass the Ghost's security. It is impossible to duplicate the key or replace it, they can't jump wires, and they can not remove the device from your vehicle because there's no radio signal.
The Ghost can be used to secure any car that has a CAN Data Network. It's compatible with most modern vehicles , and can be used to protect older vehicles with CAN data systems too.
Another reason the Ghost is so well-known is that it doesn't alter your vehicle's appearance in any way. It's so small that it can be installed anywhere in the vehicle harness and is so inconspicuous that thieves must be incredibly skilled and know exactly where to look for it to find it.
It also doesn't leave any evidence of its installation. This is crucial because thieves frequently make stealthy getaways with their vehicle once they've found it. If your car is a expensive or rare model then the Ghost will help ensure your investment is secure.
TASSA (The Tracking and Aftermarket Security System Association), has recognized the effectiveness of autowatch ghost 2 immobiliser Ghost for the prevention of theft from motor vehicles. The association is comprised of traders and manufacturers who are leading the way in vehicle crime prevention.
The Ghost is a TASSA approved device that is included in some insurance companies. The Ghost is also recognized by the police since it helps in identifying stolen vehicles. TASSA recommends working with a TASSA-approved installer to ensure that the device is installed correctly. They can give a video record of the installation and also verify the vehicle for CRB and identity checks.
No Radio Signals
The Ghost 2 immobiliser, a tiny electronic device that's hidden in the engine compartment prevents your car's starting until you enter a specific pin code sequence. It's designed to guard your vehicle from key theft, cloning, relay theft and hacking. It also comes with a secure emergency code in case you forget your pin and need to reset it.
It is compatible with all major cars and operates on a car's CAN (Controller Area Network) to prevent thieves from opening your vehicle. It's low-maintenance, silent, can be installed in a secure location and is totally invisible to the untrained eye.
The ghost 2 immobiliser problems 2 allows you to create a personal PIN for your vehicle that goes far beyond security. This pin can be entered by using the app on your phone or via buttons on your dashboard, steering wheel and dashboard. The buttons are pressed in a sequence.
The unique PIN isn't compatible with other security systems or cloning equipment, making it impossible for thieves to to steal your keys. The PIN also blocks thieves from altering the ECU inside your car in order to override your security system.
The Ghost 2 is a security feature that prevents the Ghost 2 from communicating with your dealer's computers. In rare circumstances the dealer may need to carry out vehicle fault finding and warranty work.
If your vehicle has problems the dealer will have to switch your car into service mode before they begin the process of identifying the issue. This blocks any communication between the dealer's computer and the ECU of your vehicle, and prevents any errors that could lead to the sale of your vehicle without a valid MOT certification.
This feature makes the Ghost a highly effective protection against key theft, keyless theft, and relay theft. It is available to purchase and installed to various types of vehicles including motorhomes, riding lawnmowers, motorbikes, and plant machinery.
The Ghost 2 immobiliser is the world's first aftermarket CAN bus immobiliser and it shields your vehicle from key-cloninghacking and even key theft. The only way a thief could steal your car is by physically towing it away and then they'd have to enter the correct PIN code before they'd be able to begin the car!
Keys and LEDs are not illuminated or have no Key FobsLike other immobilisers, Ghost 2 doesn't use key fobs or LED indicators to notify the user of their PIN code , or when the system is shut down. This feature is hidden to prevent thieves from spotting the device.
A PIN number is sent via the switch in your car to the Ghost immobiliser. This will stop your vehicle from getting started. It is easy to install and the user can change their password at any time.
The Autowatch Ghost does not require additional batteries or radio frequencies. This makes it possible to be installed in a wide variety of vehicles.
It stops your vehicle from starting if you use the wrong key. It also shuts down parts such as the starter motor and fuel system, making your vehicle immobilised.
This is a huge advantage because it means you don't be worried about your vehicle being stolen. It's also safer to drive, as criminals won't be able to start your car again after it's been disabled.
The Ghost system uses the CAN bus to communicate with the ECU of your vehicle. It will only let your car to start when you have entered a certain sequence of key presses into your vehicle's factory buttons. This sequence of key presses can be as long as 20 and is a unique PIN number that you only know.
Your engineer will explain the procedure for inserting the disarm sequence into your vehicle's buttons, like the steering wheel button, door-panel buttons, or centre console buttons. Once the pin code is entered into your vehicle it will be impossible for any other person to start your car.
A TASSA-approved security device for vehicles, the Ghost 2 is an ideal solution to safeguard your vehicle from hacking, theft and key-cloning. The absence of LED indicators and key-fobs makes it difficult to be found by thieves.
It's compatible with a variety of vehicles and can be installed by an approved garage without causing any damage or altering components of your vehicle. It won't void your warranty, and it can't be detected using professional diagnostic tools. This makes it safe to drive.
No Circuit Cuts
The Ghost 2 immobiliser works using buttons on your vehicle to create a personalised PIN Code sequence. This must be entered before the engine can begin. The sequence of presses could be as long as 20 digits and is able to be altered at any time , without replacing the wiring. It is impossible for thieves to find the code before trying to gain entry.
It also has a Service/Valet mode which allows your vehicle to be driven and started without the the PIN Code. This feature is designed to help you deactivate the Ghost if your car will be used as a valet parking vehicle or as services.
During installation your car will be tested thoroughly to make sure that the Ghost is working as it should. This is an essential aspect of the process and we will run through everything with you to ensure that you are satisfied with the installation before you leave.
We will then create your personal PIN Code in the Ghost to ensure that it's safe, giving you peace of mind that it isn't broken into. This is a great method for you to avoid additional security systems like remote keys and key fobs that are susceptible to theft and hacking particularly in light of the fact that theft via contactless how much is a ghost immobiliser growing in Europe.
The CAN bus data network that ghost immobiliser and tracker uses is invisible to thieves, which prevents them from using radio frequency or code-grabbing technology to detect the security system installed in your car. This is a crucial factor when it comes to the security of your vehicle. It gives you a greater level of security than other immobilisers on the market.
The Ghost has no circuit cuts that means it cannot be manipulated by professional crooks who employ tools for diagnosing and remove alarms or immobilisers on modern vehicles. This is crucial as many of the cheapest and effective ways to break into a car is by cutting wires, or altering the relays in a traditional immobiliser.
No scans using RF
Ghost 2 is the most modern generation of security for your car. It completely protects your vehicle from key cloning and hacking as well as theft. It makes use of your vehicle's existing buttons to enter an exclusive and flexible PIN code sequence. This is similar to a credit card.
The Ghost 2 is not like traditional car security devices. It doesn't include any key fobs, circuit cuts or LED indicators that could be used to track location information. The device communicates with the ECU via CAN bus and will only start your car once it has entered the correct pin sequence.
This makes it difficult for a thief to bypass the Ghost's security. It is impossible to duplicate the key or replace it, they can't jump wires, and they can not remove the device from your vehicle because there's no radio signal.
The Ghost can be used to secure any car that has a CAN Data Network. It's compatible with most modern vehicles , and can be used to protect older vehicles with CAN data systems too.
Another reason the Ghost is so well-known is that it doesn't alter your vehicle's appearance in any way. It's so small that it can be installed anywhere in the vehicle harness and is so inconspicuous that thieves must be incredibly skilled and know exactly where to look for it to find it.
It also doesn't leave any evidence of its installation. This is crucial because thieves frequently make stealthy getaways with their vehicle once they've found it. If your car is a expensive or rare model then the Ghost will help ensure your investment is secure.
TASSA (The Tracking and Aftermarket Security System Association), has recognized the effectiveness of autowatch ghost 2 immobiliser Ghost for the prevention of theft from motor vehicles. The association is comprised of traders and manufacturers who are leading the way in vehicle crime prevention.
The Ghost is a TASSA approved device that is included in some insurance companies. The Ghost is also recognized by the police since it helps in identifying stolen vehicles. TASSA recommends working with a TASSA-approved installer to ensure that the device is installed correctly. They can give a video record of the installation and also verify the vehicle for CRB and identity checks.
No Radio Signals
The Ghost 2 immobiliser, a tiny electronic device that's hidden in the engine compartment prevents your car's starting until you enter a specific pin code sequence. It's designed to guard your vehicle from key theft, cloning, relay theft and hacking. It also comes with a secure emergency code in case you forget your pin and need to reset it.
It is compatible with all major cars and operates on a car's CAN (Controller Area Network) to prevent thieves from opening your vehicle. It's low-maintenance, silent, can be installed in a secure location and is totally invisible to the untrained eye.
The ghost 2 immobiliser problems 2 allows you to create a personal PIN for your vehicle that goes far beyond security. This pin can be entered by using the app on your phone or via buttons on your dashboard, steering wheel and dashboard. The buttons are pressed in a sequence.
The unique PIN isn't compatible with other security systems or cloning equipment, making it impossible for thieves to to steal your keys. The PIN also blocks thieves from altering the ECU inside your car in order to override your security system.
The Ghost 2 is a security feature that prevents the Ghost 2 from communicating with your dealer's computers. In rare circumstances the dealer may need to carry out vehicle fault finding and warranty work.
If your vehicle has problems the dealer will have to switch your car into service mode before they begin the process of identifying the issue. This blocks any communication between the dealer's computer and the ECU of your vehicle, and prevents any errors that could lead to the sale of your vehicle without a valid MOT certification.
This feature makes the Ghost a highly effective protection against key theft, keyless theft, and relay theft. It is available to purchase and installed to various types of vehicles including motorhomes, riding lawnmowers, motorbikes, and plant machinery.